Gas Fins

[FloHBrand]

Tag zusammen,

seit September 2009 existiert die Firma Gas Fins. Kennt ihr die Finnen und seit sie zufällig schon gefahren? Was haltet ihr von der Qualität und kennt ihr den Preise zu den einzelnen Finnen?

Gruß Florian

http://www.gasfins.it

[Totti-Amun]

Auf jeden Fall gewöhnungsbedürftig...

[Boddi]

stinkt sehr verdächtig nach MauiUltraFins design.

Vielleicht eine günstigere Lizenzproduktion mit günstigerem Material.

[onefoot]

Würde mich auch interessieren ob das eine Kopie von MauiUltraFins oder ein Lizenz Produktion ist.

[gasfins]

nice to meet all people of this forum :):):)

[Totti-Amun]

nice to meet all people of this forum :):):)

Hi,

welcome on board... :)

Can you tell us more about your fins? They look a little bit like Maui Ultra Fins.

[gasfins]

hi to everybody, gas fins is a new born progeto 1 annofa with the fins from kitesurf race, at the end of the season we have conquered the second world place in the general classification of the PKRA.
From we have begun them to develop our windsurf line, in collaboration with the raider Andrew Rosatie Nicola Spadea, has held valid the concept of the fins Maui Ultra Fins and we have inserted our profiles on quell outline of fin.
We have inizato to make many prototypes more than 40 before arriving to a very fast fin and with a notable grip in the surfates, the concept of elliptic fin it makes to disappear the spin out of the table and it makes the faster table nele surfate, so the Mega line was born.
From here we have just finished to develop a new line elliptic totalemtne he/she calls ta Elix, that we have made a will to green cabo, tenerife and in south Africa.
this line of fins is slightly less fast than the mega one but it guarantees you a great estate in the surfata, it seems that the table flows on a platform of the train.
these two new lines have totally been studied and not copied by ultra maui fins, we have taken supunto from them on the concept of the outline, in fact the profiles are totally different.
From here we have succeeded in also bringing this concept on the single fins and above all on the thrusters that make to result the very less table ferenata in comparison to a classic line.
The fins that we produce are totaly projected custuom and you directly realize from us with cnc, in this way we can plan to the coputer new fins and possession the prototypes bridges on the evening.
in these days we are setting the new line slalom that has been projected putting her/it to comparison with over sixty fins of varied amrchi.
To the momneto we have succeeded in realizing a very fast fin that immediately accelerates and it reaches immediatametne his/her amssima speed in few meters, the characteristic most important it is that he succeeds in making to be the very low nose of the table avoiding spin out and the to capsize some table eprdendo so control.
:):)

[Fredstyles]

Why did you choose a brandname that already exists in finmaking business?

http://www.gasfins.com/

[gasfins]

the exactly name is gas custom made fins, for the web site is ww.gasfins.it , we know after that gas fins exist, he make surf fins and fcs adaptator.
we make kitsurf and windsurf fins :):)

[Totti-Amun]

Speedfins are quite important, do you have some pics for us? :)

[gasfins]

i can attach same fins photo and project

http://media6.dropshots.com/photos/226388/20091212/114747.jpg

http://media8.dropshots.com/photos/226388/20091212/114935.jpg

http://media8.dropshots.com/photos/226388/20091212/114854.jpg

elix single fins
http://media8.dropshots.com/photos/226388/20091128/201014.jpg

carbon g-10 custom plate for custom fins

http://media6.dropshots.com/photos/226388/20091121/182424.jpg

cnc machine at work

http://media6.dropshots.com/photos/226388/20091002/125640.jpg

/226388/20090709/101706.jpg[/IMG]

[gasfins]

analitic vìcurve project with the pc

http://media6.dropshots.com/photos/226388/20090709/101706.jpg

[gasfins]

new carbon for ew g-10 custom plate for new proto fins

http://media8.dropshots.com/photos/226388/20091117/154412.jpg

[gasfins]

now we think to test same speed fins with european championshio andrea baldini, now we talk and i hope to study with him

[gasfins]

this is new concepet of tri fins with elltic side fins and mega inside the board is too fast and more grip

http://media7.dropshots.com/photos/226388/20091210/164701.jpg

now andrea fins the test in south africa and e say me the the new configuration give more speed and more grip at the baord witha vertical bottom inside the lip
now he test with the new elix central fins
the first test are so good

[Boddi]

looks good:)

[Kris]

Definitely smooth looking ;)

[Pat520i]

Some really nice Outlines!!!

[Boddi]

this is new concepet of tri fins with elltic side fins and mega inside the board is too fast and more grip


Do u offer Tri-Fins for the AHD Seal too?

The two Select side-fins are asymetrical and not straight. Both 11cm.
The center-fin is a normal Select Sideshore Wavefin 21cm or an ultra short and small 16cm.

[herry]

Na mal sehen.

[gasfins]

hi Boddi,
nice to meet you.
We have same possibility you can try with the side ellitic fins just 10 cm or more and a elix or mega fins on the central fins you can choose for the elix the 16 or 17 for the mega; the news that you can try with two very little side fins about 8-6 but with minimum area and a new big central fins elix 21,5.for the single fins we think that the future is elix single fins more speed big turns and velocity with more grip
http://www.gasfins.it/blog/index.php

:):):):)

[herry]

Hi gasfins,

how about a pricelist?

greetings herry

[gasfins]

you can contact with mail or skype
info@gasfins.it

skype:
andrea.sterbini

:)

[gasfins]

news form the collection
twinzer elix

http://media6.dropshots.com/photos/226388/20100125/004317.jpg

twinzer wlix

http://media6.dropshots.com/photos/226388/20100125/005322.jpg

single fins elix

http://media7.dropshots.com/photos/226388/20100125/005404.jpg

wave single fins elix

http://media8.dropshots.com/photos/226388/20100125/004625.jpg

new freestyle line
diamond

http://media6.dropshots.com/photos/226388/20100125/005025.jpg

mega

http://media7.dropshots.com/photos/226388/20100125/005119.jpg

style

http://media8.dropshots.com/photos/226388/20100125/005228.jpg

[herry]

Hi,

man mehr copy geht echt bald nicht...

gruß herry

[flojoe]

Weiß jemand was die Finnen Kosten und gibt es einen Importeur für Deutschland?
Ich habe schon bei denen per mail nachgefragt, aber bis dato keine Antwort erhalten.
Insbesondere bin ich an den Twinzer Mega Line interessiert, vll hat ja schon jemand Erfahrungen mit den Finnen von Gas und kann das hier mal posten.
Danke

[FloHBrand]

Die G10 Finne kosten zwischen 160€ und 200€. Die Carbon G10 Finnen kosten zwischen 200€ und 250€.

Versuchs mal per Skype, da sind die beiden immer zu erreichen.

Viele Grüße,

Florian

[TDK]

Das haben die Jungs ja schön geklaut. Die Originale sind von Maui Ultra Fins: www.mauiultrafins.de

Deren Finnen sind wirklich genial - da hat sich endlich mal ein Wissenschaftler an das Thema Finnenbau gemacht!

Ich fahre die X-Wave und die X-Twin bzw. X-Twin-S und bin super begeistert!

Gas fins suck!

[bernie b]

Das haben die Jungs ja schön geklaut. Die Originale sind von Maui Ultra Fins: www.mauiultrafins.de

Deren Finnen sind wirklich genial - da hat sich endlich mal ein Wissenschaftler an das Thema Finnenbau gemacht!

Ich fahre die X-Wave und die X-Twin bzw. X-Twin-S und bin super begeistert!

Gas fins suck!

Hebe doch einfach die Besonderheiten hervor warum "Deine"(es gibt Leute die lesen Impressums) Marke wirklich besser ist. Und zwar im richtigen Thread.;)

[onefoot]

Haben nicht auch die JP Waveboards ähnliche Finnen wie die X-Serie von MUF? Sucken die auch? wie sind die im Vergleich zu den Originalen?

[Lessacher]

Sind die auf den Bildern in G10??? So grobe Struktur. Wolfgang